DIY charging station

A quick note on how I made a charging station out of a drying rack.

Like everybody, I have many many things that want to be charged. I also have a mess of many spare cables.

I’d had enough of this and had an idea.   I bought a multi-usb charger from Amazon (this one)  and a simple, wooden drying rack(this one).

I built the rack,  and popped the things I wanted to charge in with cables.

 

Screen Shot 2017-01-16 at 11.15.20
I worked out the length the cables should be and taped each (all spares) to the bottom of the rack (The rack also needed reinforcement, but yours might not).

 

Screen Shot 2017-01-16 at 11.15.39
I was left with lots of cables of different sizes.

Screen Shot 2017-01-16 at 11.15.49

 
I used the ‘toilet roll trick’ to make the cables the same length.

Screen Shot 2017-01-16 at 11.16.23

I then added the adapter….Screen Shot 2017-01-16 at 11.15.49

Screen Shot 2017-01-16 at 11.16.34

and slid the new station into the space for it.  Volia. Screen Shot 2017-01-16 at 11.16.54

Leave a Reply